De wikijoan
Salta a la navegació Salta a la cerca

GEDA: GPL'd suite and toolkit of Electronic Design Automation tools.

Altre software d'electrònica en el món Linux:

  • GNUCAP is a general purpose circuit simulator. It performs nonlinear dc and transient analyses, Fourier analysis, and ac analysis linearized at an operating point. It is fully interactive and command driven. It can also be run in batch mode or as a server. The output is produced as it simulates. Spice compatible models for the MOSFET (level 1,2,3) and diode are included in this release.
The homepage is:
  • There is also qucs @ The current version is 0.0.12, but the one in the repository is 0.0.09.
  • As a student, for most circuits i use ngspice, where you describe the circuit elements and node numbers in a text file. I can't seem to find the deb in the repository, so I believe you'll have to compile from source.

Però nosaltres ens centrarem en gEDA, que abarca des del disseny de l'esquemàtic, la simulació, i el volcatge a PCB, entre d'altres possibilitats.

What is the gEDA suite?

The gEDA suite is the collection of all the various tools that are part of, associated with, or just plain work with the gEDA project’s software. Currently the gEDA suite includes:

  • gEDA/gaf – schematic capture and netlisting
  • ngspice – SPICE simulation
  • gnucap – analog simulation
  • gspiceui – GUI front end for ngspice/gnucap
  • pcb – PCB layout
  • gerbv – Gerber viewer
  • Icarus Verilog – Verilog simulator
  • GTKWave – Digital waveform viewer
  • wcalc – Transmission line and electromagnetic structure analysis

Per instal.lar les aplicacions no n'hi ha prou amb sudo apt-get install geda, sinó que és millor instal.lar tots els paquets (

  • geda
  • geda-doc
  • geda-examples
  • geda-gattrib
  • geda-gnetlist
  • geda-gschem
  • geda-gsymcheck
  • geda-symbols
  • geda-utils
  • geda-xgsch2pcb
  • libgeda-common
  • libgeda-dev
  • libgeda20
  • libgeda33

També pot ser útil gwave, que és un wave form viewer:

$ sudo apt-get install gwave

Per on començar?

creat per Joan Quintana Compte, juliol 2009