Joan: /* Problemes amb versions de Python (TBD) */

2020-02-11T12:42:32Z

Problemes amb versions de Python (TBD)

Pàgina nova

=Referència=
Portable Computer Vision: TensorFlow 2.0 on a Raspberry Pi:
*https://towardsdatascience.com/portable-computer-vision-tensorflow-2-0-on-a-raspberry-pi-part-1-of-2-84e318798ce9
*https://github.com/leigh-johnson/rpi-vision
=Instal·lació (NO)=
<pre>
sudo apt-get update
sudo apt-get upgrade

sudo apt-get install git python3-dev python3-pip \
crossbuild-essential-armhf libatlas-base-dev \
libhdf5-dev libhdf5-serial-dev \
libopenjp2-7-dev libtiff5 build-essential cmake pkg-config
</pre>
Hi ha un error: és ''libtiff5'' i no ''ibtiff5''.

Treballarem amb entorns virtuals:
<pre>
sudo pip3 install -U virtualenv

git clone git@github.com:leigh-johnson/rpi-vision.git
</pre>
A mi la comanda ''git clone'' no m'ha funcionat (problemes de permisos), o sigui que m'he descarregat directametn el zip i l'he enviat a la RPi:
<pre>
$ scp rpi-vision-master.zip pi@192.168.1.60:/home/pi
</pre>

<pre>
cd rpi-vision

virtualenv -p $(which python3) .venv
$ ~/rpi-vision-master
$ source .venv/bin/activate
(.venv) pi@raspberrypi:PS1="E $ "
E $ pip install -e .
</pre>
Però em dóna un error:
<pre>
E $ pip install -e .
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/rpi-vision-master
ERROR: tensorflow-2.0.0b1-cp35-cp35m-linux_armv7l.whl is not a supported wheel on this platform.
</pre>
Triga moltíssim, i crec que no cal:
<pre>
pip install --upgrade tensorflow
</pre>
La solució està en entrar en el ''setup.py'', i comentar les línies:
<pre>
#if 'arm' in platform.machine():
</pre>
i les dues següents, de manera que no peti quan compili contra el arm. Més amunt posa que
<pre>
# tensorflow 2.0 wheel has not been released for Raspbian yet
</pre>
Però en canvi el tutorial ho fan amb una RPi3 (i es diu d'utilitzar Raspbian).
<pre>
E $ pip install -e .
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/rpi-vision-master
Collecting picamera==1.13.0
Downloading https://www.piwheels.org/simple/picamera/picamera-1.13-py3-none-any.whl (154 kB)
|████████████████████████████████| 154 kB 818 kB/s
Collecting Pillow==6.0.0
Downloading https://www.piwheels.org/simple/pillow/Pillow-6.0.0-cp37-cp37m-linux_armv7l.whl (1.2 MB)
|████████████████████████████████| 1.2 MB 805 kB/s
Installing collected packages: picamera, Pillow, rpi-vision
Running setup.py develop for rpi-vision
Successfully installed Pillow-6.0.0 picamera-1.13 rpi-vision
</pre>
=Instal·lació (TBD)=
En el portàtil:
<pre>
$ cd rpi-vision-master/

$ pip install virtualenv
$ virtualenv -p $(which python3) .venv
$ source .venv/bin/activate
$ PS1="E $ "
$ sudo apt install sshpass (ho necessito d'aquí a un minut per connectar-me per SSH a la RPi)
E $ pip install -e .
</pre>
Ara sí que funciona sense problemes, perquè estic en el portàtil.

fitxer '''.env/my-inventory.ini'''
<pre>
tee -a .env/my-inventory.ini <<EOF
[rpi_vision]
192.168.1.60
[rpi_vision:vars]
ansible_connection=ssh
ansible_user=pi
ansible_user=raspberry
ansible_python=/usr/bin/python3
EOF
</pre>
fitxer '''.env/my-vars.json''':
<pre>
tee -a .env/my-vars.json <<EOF
{
"RPI_HOSTNAME": "192.168.1.60",
"VERSION": "release-v1.0.0"
}
EOF
</pre>
<pre>
fatal: [192.168.1.60]: FAILED! => {"msg": "to use the 'ssh' connection type with passwords, you must install the sshpass program"}
sudo apt install sshpass
</pre>
Finalment ara sí: Recordem, ho executo des del portàtil (entorn virtual), i es desplega sobre la rpi.
<pre>
E $ make rpi-install

changed: [192.168.1.60]

TASK [Clone rpi-vision] ***************************************************************************************************************
changed: [192.168.1.60]

TASK [Clone rpi-fbcp] *****************************************************************************************************************
changed: [192.168.1.60]

TASK [Clone TFT drivers] **************************************************************************************************************
changed: [192.168.1.60]

TASK [Copy TFT driver install script to /usr/local/bin] *******************************************************************************
changed: [192.168.1.60]

TASK [file] ***************************************************************************************************************************
changed: [192.168.1.60]

TASK [Build fbcp (frame buffer copy for Raspberry Pi)] ********************************************************************************
changed: [192.168.1.60]

TASK [Copy fbcp to /usr/local/bin] ****************************************************************************************************
changed: [192.168.1.60]

TASK [Install TFT drivers] ************************************************************************************************************
changed: [192.168.1.60]

TASK [Waiting for TFT driver installation to finish (Pi Rebooting)] *******************************************************************
ok: [192.168.1.60]

TASK [Create .tft_screen_installed] ***************************************************************************************************
changed: [192.168.1.60]

TASK [Create virtual environment] *****************************************************************************************************
fatal: [192.168.1.60]: FAILED! => {"changed": true, "cmd": "virtualenv -p $(which python3.6) .venv", "delta": "0:00:01.775208", "end": "2020-02-11 11:11:44.427335", "msg": "non-zero return code", "rc": 1, "start": "2020-02-11 11:11:42.652127", "stderr": "", "stderr_lines": [], "stdout": "RuntimeError: failed to find interpreter for Builtin discover of python_spec='.venv'", "stdout_lines": ["RuntimeError: failed to find interpreter for Builtin discover of python_spec='.venv'"]}
</pre>
El problema està en què en la RPi tinc la versió de Python:
<pre>
$ which python3.6

$ which python3.7
/usr/bin/python3.7
</pre>
protesta perquè no tinc la 3.6. En algun lloc es fa referència a la v3.6, i hauria de posar 3.7.

Ara ho veig, en el protàtil tinc la 3.6, i espera que hi hagi la mateixa versió en el portàtil i en la RPi:
<pre>
$ python3 --version
Python 3.6.9
</pre>
L'error en la RPi està en crear l'entorn virtual:
<pre>
$ virtualenv -p $(which python3.6) .venv
RuntimeError: failed to query /usr/bin/python3.6 with code 1 err: 'Traceback (most recent call last):\n File "/usr/local/lib/python3.7/dist-packages/virtualenv/discovery/py_info.py", line 16, in <module>\n from distutils.command.install import SCHEME_KEYS\nModuleNotFoundError: No module named \'distutils.command\'\n'
</pre>
=Problemes amb versions de Python (TBD)=
<pre>
$ ls /usr/bin/python*
/usr/bin/python /usr/bin/python3 /usr/bin/python3.6m /usr/bin/python3.7m /usr/bin/python3m-config
/usr/bin/python2 /usr/bin/python3.6 /usr/bin/python3.6m-config /usr/bin/python3-config /usr/bin/pythontex
/usr/bin/python2.7 /usr/bin/python3.6-config /usr/bin/python3.7 /usr/bin/python3m /usr/bin/pythontex3

---
$ python --version
Python 2.7.15+
joan@joanHP:~/rpi-vision-master$ python3 --version
Python 3.6.9
---
alias python3='/usr/bin/python3.7'

$ python3 --version
Python 3.7.5

i aquesta comanda també la poso al fitxer .bashrc
alias python3='/usr/bin/python3.7'

i el tema és que hi ha un enllaç simbòlic:
$ ls -la /usr/bin/python3
lrwxrwxrwx 1 root root 9 d’oct 15 17:47 /usr/bin/python3 -> python3.6

ha d'apuntar a python3.7
ln -sf /usr/bin/python3.7 /usr/bin/python3

i ara ja tenim:
$ ls -la /usr/bin/python3
lrwxrwxrwx 1 root root 18 de fe 11 13:14 /usr/bin/python3 -> /usr/bin/python3.7
</pre>
Però sobretot, el que importa és la versió que tinc de python3-env:
<pre>
$ sudo apt-get remove python3.6-venv
$ sudo apt-get install python3.7-venv
</pre>
{{Autor}}, febrer 2020

RPi i TensorFlow. Object detection and classification - Historial de revisió

Joan: /* Problemes amb versions de Python (TBD) */