Joan: /* La placa: IceZUM Alhambra */

2017-06-01T16:55:01Z

La placa: IceZUM Alhambra

Pàgina nova

=Introducció=
*http://fpgawars.github.io/
Xerrada 30.3.2017:
*https://github.com/FPGAwars/workshops/wiki/2017_03_30:-Reset.-ETSII,-UPM
=La placa: IceZUM Alhambra=
[[Fitxer:Icezum-alhambra-v1.1.jpg | thumbnail]]
*https://github.com/FPGAwars/icezum/wiki

=IceStudio=
==Instal.lació IceStudio==
*http://icestudio.readthedocs.io/en/latest/source/installation.html
Basat en Python 2.7.
<pre>
$ sudo apt-get install xclip
</pre>
Descarregar i executar ''icestudio-0.3.0-rc-linux64.AppImage'' (''https://github.com/FPGAwars/icestudio/releases'')

Donem permisos d'execució i ja podem executar:
<pre>
$ cd /home/joan/IceStudio
$ chmod a+x icestudio-0.3.0*.AppImage

$ ./icestudio-0.3.0-rc-linux64.AppImage
</pre>
Quickstart:
*http://icestudio.readthedocs.io/en/latest/source/quickstart.html
Go to Tools > Toolchain > Install

Apio backend will be installed, and all its needed packages. This operation does not require Internet connection.

Setup the drivers (Són necessaris els drivers per tal de què es reconegui la placa quan es connecta, driver FTDI)

Connect your FPGA board and select Tools > Drivers > Enable. This operation requires administrator privileges.

Quan connectem la placa, haurà d'aparèixer la '''IceZUM Alhambra''' a ''Select > Board''.

I ara ja puc pujar un exemple:
*File > Examples > 1. Basic > 01. One LED
Then, you can verify, build (''sintetitza'') or upload the project in ''Tools > Verify | Build | Upload''.

{{Autor}}, juny 2017

FPGAwars - Historial de revisió

Joan: /* La placa: IceZUM Alhambra */